Home > Knowledge > Content
Precautions for the use of PPR pipe welding machine
Jul 02, 2018

PPR pipes will be used to weld machines for hot melt joints. If not, let's take a look at the matters needing attention.


1.Iinstall the heating end of the fixed splice, place the splice on the rack and install the corresponding heating die according to the required pipe specifications.


2. Switch on the power according to the instructions to note the change of the indicator light. When the splicer enters the working temperature control state, it starts to operate.


3. Cut the pipe vertically with the pipe cutter, and rotate the pipe and fittings without rotating at the same time, then push the splice die and operate according to the requirements.


4. When heating time is reached, the tube and fittings are removed from the die at the same time, and directly and evenly inserted into the desired depth without rotation.

主图1.png


主图2.png





Related Industry Knowledge

24 hours at your service:

info@cn-swin.com

Newsletter

Copyright © Guangdong Swin Plastic Industrial Co.,Ltd All Rights Reserved.